Reply To: No output to front of FOH from channel 3 / St3

Forums Forums Qu Forums Qu troubleshooting No output to front of FOH from channel 3 / St3 Reply To: No output to front of FOH from channel 3 / St3

#49808
Profile photo of Dick Rees
Dick Rees
Participant

Press the “assign” butoon when on the desired layer/mix/bus and you’ll see the channel lights of the assigned channels light up. Chances are you won’t see the green light for that channel and will merely have to press the channel select button while holding the assign button to get it green-lighted and passing signal to the desired bus.