Reply To: Phase Issue???

Forums Forums Qu Forums Qu general discussions Phase Issue??? Reply To: Phase Issue???

Profile photo of Dick Rees
Dick Rees

OK, so check the wiring in your Neutrik cables to verify there’s no polarity flip from mis-wiring. You can also try running mono out of your crossover to the tops or feeding the crossover from the Alt Outs on the Qu and assign the feed to the output as L+R instead of L/R.

To check the polarity of your main tops you can use the old 9v battery trick and visually observe the direction of the cone excursion when voltage is applied.

Happy hunting and good luck.