Reply To: No grouping functionality on QU-16

Forums Forums Qu Forums Qu general discussions No grouping functionality on QU-16 Reply To: No grouping functionality on QU-16

#49081
Profile photo of Dick Rees
Dick Rees
Participant

If grouped level control is all you need, then the DCA’s of the 16 will do.

If you need PROCESSING as a group, then the Qu-16 workaround is to use a Mix such as 9/10 as your group and route it to either of the St1 or St2 inputs for group processing/level control. This requires un-assigning the chosen channels from the L/R mains bus and hard patching the Mix 9/10 outputs to the chosen St input using a pair of XLRF>TRS jumpers.

It works if you can spare the Mix.