Reply To: use equaliser to put low pass filter in place

Forums Forums Qu Forums Qu general discussions use equaliser to put low pass filter in place Reply To: use equaliser to put low pass filter in place

#48770
Profile photo of
Anonymous

I do this all of the time into (powered 1200 watt B52’s) and non powered Subs using Lab Gruppen 4k amps
However I cross at about 100 hz
all faders (except 30hz left at 0db) 40 through to 100 I raise up. 125hz I leave at 0 (sometimes right off). the rest of the faders I bring down to off.

Not technically Ideal however it works fine.
Use your ears and be careful and actually go and look at your driver cones to make sure you are no pushing them too hard in those conditions.