Reply To: Ringing Out The Room – Channel or Overall PEQ?

Forums Forums Qu Forums Qu general discussions Ringing Out The Room – Channel or Overall PEQ? Reply To: Ringing Out The Room – Channel or Overall PEQ?

#47980
Profile photo of coffee_king
coffee_king
Participant

Hi Guys
Sorry its been a while since I’ve posted on here Ive had various other things to sort out in my life.

Ive tried uploading SHOWS etc on here, but no one ever gets back to me on them.
I’ll try to record any sound issues from now on if you like.

I’ll now try to work to:

Point speakers to centre of rear wall (I always do anyway)
Get speakers to at least 7’ to the bottom of the cabinet. (This is a bit higher than I usually do, but will give it a whirl)
Set speakers to 9 o’clock LINE IN.
Address 3 or 4 resonances below 300Hz (Remind me why not above again?)
Use HPF on vocal mics to remove low kick drum rumble/resonances (Start around 80-90 try not to make mic sound too thin)

I’ve got a gig on Saturday with Electro drums (First time for everything) as there is a limiter in the room so that will be interesting to see if there are any issues, how quiet we can play etc etc.

Anyone got any vocal, guitar and drum compression setting theyd like to share for “Rock bands”?

Again, many thanks everyone for your continued support.