Reply To: Qu-You will not connect

[MikeShand]

Using the “internet in” socket doesn’t sound right. A standard router will attempt to GET an IP address using DHCP over such a port, which will fail because the QU won’t provide one. And it will also operate that port on a different subnet.

What you need to do is plug everything into one of the, usually 4, non internet ports. They will respond to DHCP requests and operate on the same subnet as the wifi. You don’t need to use the internet port at all unless you DO want to connect to the internet.

Or you could orate the router in bridge mode, but that’s another story.

Hope that helps.

Mike