Reply To: Adding a delayed LR mix tap for Church PA

Forums Forums Qu Forums Qu general discussions Adding a delayed LR mix tap for Church PA Reply To: Adding a delayed LR mix tap for Church PA

#45885
Profile photo of funkcity
funkcity
Participant

The Latest:
Assign the ALT output to be LR (POSTFADE) Now the MAIN LR Fader controls all Mix outputs.
Patch ALT out to Stereo 2 Input.
Raise Stereo 2 fader to zero in mix 3 (pull all input faders down off)
Raise Stereo 2 fader to zero in mix 4 (pull all input faders down off)
Raise Stereo 2 fader to zero in mix 78 (pull all input faders down off)
Send -18 tone to LR
Set ALT OUT Gain Knob for zero using Qu-Pad meters mix LR, 3,4, 78 to all be zero (-18)
Set additional delays on 3 and 4 for Vestibule and Outside respectively.

The Choir and Cantor and Guitarist rehearsed. I walked the house and tweaked a bit.
All is cool now and I can begin setting “Scenes”! 🙂

Maybe they can add these??
Scenes and Softkeys are NOT on the Qu-Pad. Boo!
The mixer’s Custom Layer is not on the Qu-Pad
The Qu-Pad Custom layers are only 8 wide (16 is preferred)