Reply To: Adding a delayed LR mix tap for Church PA

Forums Forums Qu Forums Qu general discussions Adding a delayed LR mix tap for Church PA Reply To: Adding a delayed LR mix tap for Church PA

#45799
Profile photo of funkcity
funkcity
Participant

Here is what I did today.

1 calibrated all mics and pres so that once balanced balanced I could start with all input faders at -5dB.
I did this for MixLR out and Mix7&8 out.
2. I then set a DCA on the iPad Qu-Pad. I named as “MASTER” and assigned it to Mix LR and Mix 7&8.
(This is NOT PERFECT but it works so far. But I think internal routing needs to be more in depth.
Note: If you think old school, you would just assign the same signal to more busses! Ha! 🙂
3. Rung out the feedback points at both house locations. Parametric and Graphic are way cool here.
4. Set the delay for most natural and intelligible spoken word.

I would love to have a built-in Dugan automixer in this board as I have in the 3 Yamahas I use at work!

And…BTW, for the Yamaha upright piano I installed Helpinstill piano pickups…no feedback, no crosstalk from other nearby instruments, even sound. Out of production for years he again is selling direct-only from Texas. http://www.helpinstill.com Just add a little Qu EQ and it’s very cool!