Reply To: Dante – logic – no audio – help!

Forums Forums iLive Forums iLive troubleshooting Dante – logic – no audio – help! Reply To: Dante – logic – no audio – help!

#44421
Profile photo of dymondaudio
dymondaudio
Participant

“To use Dante and Editor on the same network, set the Dante card to a static IP address compatible with the iLive network, for example 192.168.1.10 and reboot the card. This is done in Dante Controller. Set your laptop to another compatible static IP, for example 192.168.1.100”

Doing this made editor ‘see’ the i-DR but dante stopped working and the controller couldn’t seem to detect the card properly or allow me to change any settings, route audio etc. there seemed to be a clock issue but would not let me access any settings. When I changed my wireless settings back to auto ip dante started working again but editor could no longer ‘see’ the i-DR.

I’m running mac OS 10.10.1 and have the latest version of editor, dante controller, dante vsc and firmware installed.