Reply To: AUX1 doesn't work

Forums Forums Qu Forums Qu troubleshooting AUX1 doesn't work Reply To: AUX1 doesn't work

#44407
Profile photo of Dick Rees
Dick Rees
Participant

The channels need to be assigned (routed) to the desired aux/mix. Select the Aux 1, then press the “assign” button on the LH side of the console and press the “select” button of each channel you want to route to the aux/mix while holding down the “assign” button.

That should do it. When you press the assign button while Aux 1 is selected, all channels that are assigned to it should light up green. If not, do the above.