Reply To: Wired Mics don't work

Forums Forums GLD Forums GLD troubleshooting Wired Mics don't work Reply To: Wired Mics don't work

#43832
Profile photo of dcongdon
dcongdon
Participant

Hmmm… It is hard to diagnose with limited information, but I would suggest checking:

1. Are the inputs assigned (“on”) to the LR mix?
2. Are the inputs controlled by a DCA and muted?
3. I assume you have checked everything in the signal chain for each input? Can you use a test source that works on a familiar channel and then move it to the malfunctioning channels?
4. In the i/o menu, are the correct inputs patched to your Dsnake sockets?
5. On each channels preamp menu page, is the corresponding input set as the input source?

Best of luck!