Reply To: FX applied to FOH and Mixes

Forums Forums Qu Forums Qu general discussions FX applied to FOH and Mixes Reply To: FX applied to FOH and Mixes

#43276
Profile photo of BLKGHOST
BLKGHOST
Participant

The good way to control the amount of FX in a mix, is by using the FX Return (it controls the dry/wet ratio). The FX Send is the same for all the mixes. This is the master fader for an FX. To do what you want, you’ll need to use 2 or more FX units (one per mix.

I’ll try my best to explain :

You press FX1 and raise CH1, CH2 and CH3 – This is now your wet signal from FX1 press PAFL and listen to it. This is what you’ll be mixing into other mixes using the FX Return fader (ratio). You cannot have another wet from FX1. The FX Send fader controls the volume of you wet.

You go back to Main LR and raise the FX1 returne halfway – You are now mixing the wet CH1, CH2 and CH3 signal to the Main LR mix
You go in Mix1 and raise the FX1 Return You are now mixing the same wet CH1, CH2 and CH3 that you first created to the Mix1

You cannot have a different wet for CH1 unless you use FX2