Reply To: Ilive T 112 with two IDR 32 with Dante card

Forums Forums iLive Forums iLive general discussions Ilive T 112 with two IDR 32 with Dante card Reply To: Ilive T 112 with two IDR 32 with Dante card

#42438
Profile photo of dpnh
dpnh
Participant

Last night we tried to make it all over again, but we have started with the iLive default presets; 7_DualRack-FOH existing in library templates.
The whole setup was quite and soft. We follow step by step explanations from the document posted by ddff here, a real guide through whole process, helping us a lot – Thanks a lot!

The main problem in our case was the bridge connection port on the m-ACE card. The Link 1 on port B didn’t respond properly and we didn’t get the reason for that. Even the network signal and lights at Link 1 port B was off. For this reason we pull out the cable from Link 1 (port B) and plugged it to Link 2 (port B). The system displays an error message and ask for cable to be switched back to Link 1 (port B). After few minutes the slave MixRack preamps was detected online.

A major minus which I want to mention here is that in Dual-Rack-Mode setup I’m still unable to insert multiband processing on slave inputs from the Master Rack.
Hope this will be improved soon with the next firmware updates. Thank you for confidence.