Reply To: Feeding signal to Avioms

Forums Forums iLive Forums iLive general discussions Feeding signal to Avioms Reply To: Feeding signal to Avioms

#41700
Profile photo of HR
HR
Participant

Thanks for the feedback. We solved the problem by assigning the same input to spare channels and then using the direct out of the spares to go to the MMO card for the Aviom signal. By leaving these channels set with Preamp on surface, and the original channels set to Trim on surface we were able to set the gains, which are tied to the input, sufficient to drive the Avioms and then use the trim to adjust FOH. As long as we don’t have to use much negative trim we seem to be OK. A side benefit of this is we now can set the direct out signal to come post everything which allows us to add processing the signal going to the Avioms. So far so good.