Reply To: Channel blinky lights die!

Forums Forums Qu Forums Qu general discussions Channel blinky lights die! Reply To: Channel blinky lights die!

Profile photo of Nicola A&H
Nicola A&H

Hi Lou and Ken,

Can you confirm this still happens when all channel processing (gate, eq, compressor) is off? The Input meter is post processing, so heavy compressor settings or a high gate threshold could easily be the culprit here. The Peak indicator on the other hand is multi-point – this was designed to warn the engineer of ANY peak along the signal path, and explains why you can sometimes see just the red LED lighting up.

However if you are sure this wasn’t the case I’d recommend contacting our local distributor for servicing.

Hope this helps.