Reply To: Splitting channels digitally

Forums Forums Qu Forums Qu feature suggestions Splitting channels digitally Reply To: Splitting channels digitally

#41651
Profile photo of LKY
LKY
Participant

Well,

Perhaps I’m not understanding…

But if your FOH will use the eq on the input…

And your output channels will use the eq on the outputs…

Correct…

Or are you looking for another intermediate one…

Like FOH on input…
Each output has one…

But one in the middle to eq/delay the voice without effecting the rest of the output channel…

If so, you could use an fx channel to do some work…internal fx…
Or just send loop it via using an output just for the voice and a return…and use either of the processing for the voice…

Ex…
Voice on channel 8…
Use Pre eq…route to output x…and p,ug that back into input y…
Continue using the FOH as normal…
And use the non eq versions as you did already…

Hop either of them will work…

If your wanting something else or I’m off let me know…there are lots of options…