Forums › Forums › GLD Forums › Archived GLD Discussions › Understanding PAFL › 2916
2013/09/24 at 3:53 am
#34922
OK..I will have to try that.
While we are sort of on the subject. I noticed when I pull up the stock GLD Monitor show there is NO Main. Only IEM and WEDGE. OK when you set MIX on say AUX 1, a source say from 45/46 for test will only assign to that AUX in PRE mode. Is that by design?
If I create a Main and set channels to on then the source will work in post mode to the Aux. It is still OK for the intended use I guess. Just struck me odd that it would only work in PRE..Like I said, still figuring this thing out. Routing is the most difficult part of the learning curve.
GLD 80
AR24/12
