Profile photo of dshriver

2. If you chose “MixRack Input” instead of IP direct out then the feed to the Dante will be post gain but pre-trim. If you take Direct Out its post gain and trim.

3. To do this you’ll want to set up a couple of scenes that just change the input patchbay. What I usually do is make scene 1 a full scene with all parameters. Then scene 2 and 3 are scenes that only contain the patchbay. On scene 2 update it with all the IP sources coming from the Mixrack sockets and on scene 2 update it with all the IP sources set as Dante inputs. Then recall scene 2 to mix a live show and recall scene 3 to playback and mix a recorded show. Changes to EQ or FX or routing (etc etc) that you want to make can be saved in scene 1.

4. You might trim a few dollars off that price if you find one used, but they are a rare commodity on the used market.


David Shriver
Director of Technical Operations
Email: david@rockportmusic.org

Shalin Liu Performance Center
37 Main Street
Rockport, MA 01966