2677

#34070
Profile photo of millst
millst
Participant

DANTE does and will work over WiFi if you are careful / clever.

The DVS is programmed to not use internal WiFi cards, but if you use an external ethernet based WiFi device as your receiver it will work with the DVS set to higher latencies.

Note: You cannot connect two iLives together over DANTE wirelessly as the Brooklyn module does not have enough buffer to deal with the latency.

I recommend carrier grade wireless gear such as Ubiquiti.
I would also not recommend high channel counts. I have transmitted and received 8 DANTE channels in both directions over wireless successfully.