Profile photo of Dave

I would like to see an auto-gain mode that is switchable for early-show (soundcheck or initial show start). The behavior I would like to see from this mode is primarily to assist in proper gain staging. If the system detects overloading of the preamps, I would like for the system to be able to lower the gain on the preamp and compensate all signals derived from that preamp by the same db increment to keep relative levels the same. As I manually change the relative levels the system conforms the automation of all derived gains to the new manual levels.

A selectable auto-off mode might also be useful after the system detects no overloads for a set period of time the auto gain disables automatically or under manual control.