Profile photo of TJCornish

2. Unlike the Yamaha, the GLD/iLive have a tap point so you can send the output to the auxes post EQ/pre dynamics, or pre eq/pre dynamics, and several other options. I forget where this is off the top of my head, but I think you get there by pressing the select key of the aux send in question and going to the routing tab? Anyway, this will likely eliminate your need to split channels.

4. Resetting the EQ (or anything else) is done by holding the Reset button on the surface while pressing the Select button of what you are intending to reset. This works for PEQ, GEQ, dynamics, and lots of other things.