Profile photo of xjcsa


Originally posted by ahjeff

Hi katapult

A 100 megabit or better switch is required. Gigabit would work, but would generally be more expensive.

The ME-1 units will stay powered on as long as they are plugged into the PoE switch.

Be careful when choosing a switch, because although lots of switches advertise, for example, 8 PoE ports, most will have a relatively low total power limit. For ME-1 you need 15 Watts per port, so take this into account if you got the standard PoE route. The ME-U can supply 15 Watts on all 10 ports simultaneously.

Hope this helps

– Jeff, A&H


Is the Dante card for the MEU the same as the Dante card for the mixer, or is it a different card?