Forums › Forums › GLD Forums › Archived GLD Discussions › Qos Error, Dante Card? › 2111
BobWitteUPDATE
The event went perfectly. I did reload the Firmware (reloaded the same version we had which is the lates) too after having problems with the A&H 120M cable. Will try the 120M cable again when we can get the mixer set up. I have a small hunch that possibly something else was wrong and the reload of the firmware fixed the problem.
quote:
Originally posted by BobWitteUpdate:
250 Feet of Duracat cable – no errors. This is for a customer for an event that we are live recording 16 rooms with three laptops on a Dante network. We will have an AR2412, AR84 and a second AR84 located from 100 to 250 feet away and run mic cables in the ceilings to them along with the four GLD local channels.
Duraat from RapcoHorizon may be what we try next at 300 feet.
Bob
GLD80, AR2412, 2xAR84, Dante
Bob
GLD80, AR2412, 2xAR84, Dante
