Profile photo of 01soundman

Would like to revisit this thread to see if the following is still true:

Follow up: To my dismay, I found the following in the Hardware Reference (v1.7), “part 1-34”:
“Surface Port B and firmware version V1.7. It is possible to fit the M-MMO option and assign its outputs, but note the following:
The Status screen does not recognise the Port B option even if one is fitted. Use the TouchScreen or Editor OUTPUTS screen ACE Link or ESA tab to assign signals to the M-MMO option fitted in Port B. Use CH33 and higher. These are permanently mapped to the M-MMO output sockets according to the table below.”

The “table” shows AVIOM (the object of this little adventure) Not Used.