Profile photo of Geddy

Hey Mikey,

you have to distinguish between the transmitter / receiver matrix in Dante controller and the port B patching in iLive.
For example: You have set up a full 64ch matrix in Dante with iLive as transmitter on all 64 channels to a PC as receiver and vice versa PC as transmitter on all 64 channels to iLive. Now you can patch any direct out or any output to one of the 64channels of iLive’s transceiver matrix. Same you can do with all iLive’s inputs from the iLive receiver matrix. If you do the same in your DAW with corresponding in/out it will work properly.

A good overview to that topic is given in a couple of videos in the web:



Hope it helps.

br Gunter

G√ľnter Eisbach
Darmstadt / Germany