Forums › Forums › iLive Forums › Archived iLive Discussions › Dante card & 144 surface? › 2300
Hi Heldar,
This is a known issue. At present the iLive does not display any information about Dante cards fitted in Port A of a modular surface. However, rest assured that the card fully works.
Remember you have to set up the Dante network manually using Dante Controller. Channels 1-32 will need to be transmitted between each device for local I/O. Ch63-64 need to be routed from the MixRack to the Surface for PAFL. Ch64 from the Surface needs to be routed to Ch64 of the MixRack for talkback. The Dante card in the MixRack has to be set as the preferred master clock and ‘Slave to Ext Word Clock’ should be ticked.
This leaves you 30 spare channels for recording if you wish.
Hope this helps
Nicola
A&H
