Profile photo of Stealth

Hi Claroque


if I follow you correctly, it is safe and reliable to use both ports to route to 2 different devices…

Yes currently all 3 ports work in exactly the same way so you can connect each port to a different Dante device. Currently if you remove a cable it is possible for audio to drop-out on other connections to the Dante module.

With the new Dante firmware and redundancy enabled the Primary port on Dante module 1 can connect to another Primary socket on another module (module 2) and Secondary port (Module 1) to the secondary Port (module 2), then if you remove either the primary or secondary cable there should be no dropout in audio.

I’m afraid i can’t give you an exact date on when the new Dante firmware will be available at the moment.

Hope that helps

Sam A&H