Forums › Forums › iLive Forums › Archived iLive Discussions › DANTE and xDR › 2168
2012/09/12 at 9:15 am
#31348
Hi
In Firmware V1.83, you get 16 inputs from a Port B card fitted to an xDR-16. However, all signals routed to Master Rack Port B will be routed to the Port B card in any xDR-16s, so you can have ‘up to’ 64 outputs, depending on what physical output sockets you are using on the xDR-16. The user interface in the Ouputs screen aims to make it relatively clear what signals go where. You can configure which Master Port B channels the output sockets on the xDR-16 use, in the Mixer Prefs setup page.
Hope this helps.
– Jeff, A&H
