Forums › Forums › iLive Forums › Archived iLive Discussions › Main Output Limiter › 2151
2012/08/26 at 1:17 am
#31217
quote:
Originally posted by pealsoundHi RayS
Yes, in theory I could use the matrix limiters, but I’m using 3 different matrixes (2 analog recorders and the PPM meters) so it’s not ideal – I’d be recording something I couldn’t easily monitor. And it still doesn’t sort out the loudspeaker monitoring via the PAFL section.
It would be so much easier if the limiter was in the right place on the mix bus!
IDR48 – T112 – Dante card
if your mains feed the matrices then all these matrices will be post limiter/eq/comp etc,from the main L_R …..also solving your pafl problem since you would be monitoring post fader etc….??!!
RayS
R-72/iDR32/iPS10