Forums › Forums › iLive Forums › Archived iLive Discussions › Recording Problems with Dante and Remote Desktop › 2105
2012/07/16 at 7:23 am
#30995
… you have to use cat5e or cat6 cables.
this is mentioned in the manual because of the gigabit infrastructure.
try an (also) inexpensive cat5e cable and see if there are dropouts, too.
my recommendation is to place the recording-computer onstage – so you have very short
cable-runs (dantecard -> pc) and you can remote this from foh tunneled through ace.
by the way: i’m recording with logic, too …
hope this helps
greetz,
andie
—
andreas putz
foh engineer
office@inlinemedia.at