Forums › Forums › iLive Forums › Archived iLive Discussions › Assigning slave inputs to direct out › 2059
2012/06/06 at 11:06 am
#30769
Hi
You should be able to select the slave rack device in the Outputs screen, then route your bass and rythm guitars to Port A ACE channels 33 and 34. Now select the master rack, and select the iDR-10 tab. Choose an Aviom channel on your multi-out card, and as the source, choose Port B ACE channel 33.
The slave > master rack bus connections only use the first 32, and last 2 channels of the ACE card, and in only one direction. The other 30 slave > master channels are free to use as you wish, as are all 64 of the master > slave channels.
Hope this helps.
cheers
– Jeff
[edit] to change reference to ‘Port A’ to ‘Port B’ [/edit]
