2059

#30740
Profile photo of erasedslate
erasedslate
Participant

Setup: iDR10 – Master, iDR16 – Slave, 144 Surface

What I need is an input on the slave rack to be a direct output on the master.

Essentially, I am using an Aviom without the Multi_out. So, there are 16 outs on the Master Rack that being used for aviom. For most of the band, the outputs are directly mapped to the inputs.

I have the Bass and Rythym Guitars in the Slave Rack. I need to map the inputs of those guitars to the Outputs of the Master Rack.