1967

#30356
Profile photo of Nicola A&H
Nicola A&H
Keymaster

Hi Lody,

RDNet is an RCF proprietary protocol. Although it can use RJ45 connectors, it is based on RS-485, which is not compatible with Ethernet devices, so the simple answer is no.

However, if you have an RDNet Control8 device on stage, this provides an Ethernet port for remote control. You can tunnel this port over the ACE connection in order to operate RDNet from FOH, as long as it doesn’t exceed the available bandwidth (roughly 10Mbit/s).

Hope this helps

Nicola
A&H