1840

#29035
Profile photo of RayS
RayS
Participant

[/quote]

Originally posted by luciano

Having the compression parallel inject option on the input side on individual channels will not really serve the purpose.

[/quote]

….Compressors are available on the groups stereo or mono ,as well as on auxes matrixes and inputs, just engage the parallel path button on the subgroup compressor and you will not only have separate wet and dry components to mix as you please or adjust “live” but also save yourself half the group busses and, this will be phase coherent…….if you really want more flexibility and avoid phasing issues, do not use 2 stereo groups, use a stereo subgroup with compressor and, assign that subgroup to a DCA and then assign the inputs to another DCA (ILive has 16 ).

When you need more dry level you raise the subgroup DCA (pre compression) and lower the inputs DCA, when you need more wet signal you raise the inputs DCA (post compression) pushing these inputs to the compressor and lower the subgroup DCA ……there are many variants on this as you can assign as many DCA as you have subgroups or use the 2 DCA method , you can also pfl either DCAs/subgroup and adjust to taste, it’s quick and it works…….ILive is a different animal and there’s always more than one way to do things…..

RayS

R-72/iDR32/iPS10