1716

#29433
Profile photo of Stealth
Stealth
Moderator

Hi Scruffyd & ddff lv

Just to Clarify RackFX Outputs are taken directly from the output of the FX unit. There is no level fader for this output or FX PEQ option.

If you wish to have an output level fader for the FX unit to Dante, you will need to either send the output of the FX unit to a mix channels e.g. matrix channel External input then send the Matrix channel to Dante.
or use the ‘input fx’ return and send this return to either a group or aux then use the group or aux to Dante so you will have an output level fader.

Hope this helps.

Regards
Sam A&H