Profile photo of ddff_lv

No scenes did not have any gain or phantom status changes- just mutes. It was my post about an eathquake on phantom status change with scene- this has logical explanation. Basically that setup was quite simple- i had 2 PA systems one fed from mains, sub from matrix and secondary PA from a stereo group. First 10 channels were routed to secondary PA only, other 30 to main PA. Scene 1 had first 10 channels open, group unmuted and sent to matrix (subs). Scene 2 had first 10 channels muted, group muted, last 30 channels open and sent to main and also matrix (subs).
Nothing complicated, I think.