1548

#28084
Profile photo of Stix
Stix
Participant

quote:


Originally posted by ztemplin

I would do it that way, but the board processing is all i got for my L+R mains


just use the Matrix processing for your main outputs instead. If you just think of your main L/R as a subgroup that feeds all other matrix outputs then set up as many matrix’s as you need. I normally have a matrix for mains, front fill, record, delays etc. Don’t put processing on the L/R buss and you can then bury it in a layer as you don’t need to access it.

Cheers

Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72/Mixpad