Forums › Forums › iLive Forums › Archived iLive Discussions › iDR32 preamp issues › 1523
RayShave you tried resetting the cpu? it might be worth a try……..
Save you present settings then locate the plastic plug in the rear of your iDR32 for the dip switch access…….
RESET SWITCH FUNCTION
Switch 1 Resets mixer settings
• Processing – current settings [iDR-32/48]
• Strip assignments [T80/112]
Switch 2 Clears all scenes [Both i-Live and iDR-32/48]
Switch 3 Clears configuration sector
• Input setup – mono and stereo channel settings [iDR-32/48]
• Mix configuration [iDR-32/48]
• Buss configuration [iDR-32/48]
#9642; Reset user profiles
User names
User passwords
User permissions
User default power-up scene
• IP address [Both T80/112and iDR-32/48]
Switch 4 Reset user profiles. [iDR-32/48]
• User names
• User passwords
• User permissions
• User default power-up scene
RESET PROCEDURE
1. Power OFF.
2. Move appropriate switch to UP.(switch3 for you Biggsounds))
3. Power ON. Allow system to boot.
4. When system has booted – power OFF.
5. Move switch to DOWN.
6. Re-boot system.
hope that helps……
RayS
R-72/iDR32/iPS10
