Forums › Forums › iLive Forums › Archived iLive Discussions › Connect 2 computers and surface › 1473
2011/03/03 at 5:46 pm
#27626
MissingLinkParticipant
Mario, You can connect two PCs to the mixrack using the 2 network ports. Connect the surface using the ACE port.
Each PC must have it’s own IP such as 192.168.1.10 and 192.168.1.11.
You can also connect a WIFI wireless access point to one of the network ports on the mixrack and then connect over wireless. Turn on DHCP on the access point and you won’t have to set the IPs on the computers connected wirelessly.
Hope this helps,
Mark
