1438

[styler1982]

Just figured I would throw a couple of odd things out there I am noticing as I am restoring my consoles from the templates.

Here is the config:
iDR-32
A: T112
B: ACE
iDR-16
A: T80
B: ACE

I have these connected properly to achieve a digital mic split and run the 112 as the FOH and the 80 as the MON.

When I load the FOH-LRSub show on the 112 and recall the appropriate scenes for the idr32 and 112 a strange thing happens. The C section of inputs from the surface are not preset to any inputs on the board 1-32 are coming from the iDR32, 33-56 are configured for port b, and the last 8 are the A section from the surface. No big deal I patched them back in manually, but I tried recalling these settings multiple times and got the same result.

Stephen Tyler
Coordinator of Technical Operations
ACM@UCO
http://www.acm-uco.com
iLive T-112/iDR-32; T-80/iDR-16; iPhone; iPad