1362

[antonyja]

Groups can be routed to Auxes. These can be either pre or post fade. thus the routed signal to auxes and mains is taken before the fader, and if post fade aux or mains then the position of the group fader is taken into account when calculating the crosspoint gain. We moved the limiter to post fade position so that it can be used properly as a protection limiter i.e. no gain can be added to the signal post limiter. If the group is routed to an output then the limiter is in the path, so it would not be good to remove it from the screen.

Antony Jackson
Software Manager
Allen & Heath Limited