1298

#26629
Profile photo of Stealth
Stealth
Moderator

Hi Jan

when using dual Rack to use full control of the preamp (gain, Polarity, Phantom power) – input sockets from the master mixrack use channels 1-64 and input sockets of the slave mixrack use channels 65-128.

Once you have configured your system so that you are in Dual Rack mode you will have the ability to select channels 65-128.
You may need to assign these input channels to a channel strip on your surface layout. once you SEL a channel in the range of 65-128 in the preamp window there is a drop down box called ‘Source’ you will be able to select your slave mixrack & sockets here which will enable full control of the Preamp (gain, Polarity, Phantom Power).

Regards
Sam A&H