Profile photo of dnxmirrorsounds

I didn’t think it was particularly radical. If you can hear the source move when you pan it then it needs to be stereo.

we have the speaker towers either side of the stage which is the width of the room and so, unless we were crossing the subs over at about 32 Hz then at least I can hear the difference :)

The other side of this is that even if you use the built in LRSub setting you lose 2 mixes any way so you may as well run a stereo aux instead so that we don’t waste a mix bus – there’s only 32 of them <grin>

Stereo is good. Surround is probably a couple of years away :)

Duncan Whitcombe
Mirror Sounds & metrochurch
Perth, Australia
T112, iDR48x2, Dante soon