Profile photo of ahjeff


Originally posted by Stix

I gather at the moment with firmware 1.63 I will need 1 x ACE card in the master rack to do dual mixrack mode, or an ACE card in both mixracks port B to do a full monitor split (with two surfaces) – is that correct?

Hi Richard

Yes, this is correct. You will not be able to use Dante for dual Rack in this situation, as the slave rack must use Port A to connect to the master, which in the case of the iDR-16 will be fixed as ACE. You will however be able to put a Dante card in Port B of the Slave rack in this situation. For FoH/Monitor split, you will be able to use Dante.


– Jeff, A&H