Profile photo of Lieven-Dewispelaere


concerning the routing and mixing. It can be done offline. Every input and mix channel has its mix button in the editor ( and on the actual surface as well ) if you want to assign a certain channel to a certain mix then select the mix button off that mix and you will see that all the input channel change color, than you can use the on button and post/pre on top of each input channel to assign it to that mix and use the channel faders to feed how much signal you want to go to the mix. you better download the editor manual from the A&H website. this function is better explained with pictures than i can do here.


Save a tree, eat a beaver