Lieven-DewispelaereStix,
I use the pinanson ( spain) cable. it is a power(3*1.5mm2),1 audio/dmx,2 UTPCAT5.(60m)
But i am not fully satisfied.The network status on the surface indicates sometimes that there are some errors in the utp connection ( orange or sometimes red ). This happens only when people walk over the cable. When the cable is up in the air or out of the way all is fine.
Although I never lost connection or had zero glitches i will buy a second separate utp cable for very critical shows. I think neutrik . Watch out, there is a new document in the knowledge base about the type off utp that will work. Belden 1305A was in the previous supported cable but now it is ruled out as sufficient.(Cat5 cable for ACE: https://allen-heath.helpserve.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=198&nav=0,5 )
I put a multi pin on the cable with the connections available on a 19inch panel ( see photo )
kind regards
Lieven
T112/IDR48
Disclaimer: I disclaim everything. The contents of this message might be totally inaccurate, inappropriate, misguided, or otherwise perverse – except for my name (hopefully I got that right).
