951

#24772
Profile photo of Stealth
Stealth
Moderator

Hi Thomas

It sounds like a unit measurement difference. The iLive system displays signal levels in dBu where as most software digital audio workstations (DAW) and computer soundcard control panels display signal level in dBFS.

To test this is the case, Set the signal generator to 0dBu sinewave and assign the signal generator to a mono group, set the mono group fader level to 0dBu then send the mono group out of the ADAT output on the MMO card. the level you should recieve on the input of the DAW should be 0dBu or -18dBFS.

Hope this helps

Regards
Sam A&H