827

Forums › Forums › iLive Forums › Archived iLive Discussions › Wi Fi › 827

2009/05/27 at 9:08 pm #24334
Profile photo of stuartukstuartuk
Participant

Hi Jota

Suggest you change the IP address of your WiFi access point say to 192.168.1.254. Assign a static IP address to your laptop say 192.168.1.20, and keep the default IP addresses of the iLive components. You could use the DHCP feature if it has one of your WiFi access point or router, assigning a range of 20 IP addresses, starting at 20. You should find that the Editor software will find the surface or iDR when you try to connect. I always find it takes a lot longer to sync up over WiFi than on a wired LAN connection.

BTW it goes without saying that you should implement security at the access point. At least WEP, or preferably WPA.

Enjoy![8D]