Profile photo of Lieven-Dewispelaere


You can assign channels to groups just like you would do in an analog way. Make sure setup mode is set to ‘None’. then bring up your ‘mix’ screen. press mix button on your mono or stereo suggroup. Now your input channels will change color. You simply assign channels that you want in the group by set them to ‘on’ on top off the channels. All the channels are by default assigned to L/R. You can unassign the channels that you send to the group and don’t want in you main mix in the same way. Select main left or right. Now you can unselect the channels you don’t need in the main bus.

Hope this helps

this editor is so much more logical and practical then mij yamaha LS9 editor. Live mixing monitors is a dream with the mix buttons.