Forum Replies Created
-
AuthorPosts
-
2019/09/05 at 6:58 pm #86214
some video guys gave me this hint…
with Multimode SFPs and MM Core+Patches 250m I have a cable loss of 3-5dB
with Singlemode SFPs and MM Core+patches I have only 1-2db cable loss.
Singlemode Transceivers are made for distances of 10km+… 250m is only a patch in singlemode-world 🙂best regards
Florian2019/09/04 at 6:05 pm #86195I’ve used this TP-Link converter for years… TP-Link MC200CM (2x Primary, 2x Secondary and 2x Spare off course!)
But now, I’m going with the mikrotik switches…
for short distance (100-300m) I use Singlemode SFPs and Multimode fibre. It works without problems. (Singlemode Transceivers have more transmit power.
Also the Adapter patches from SC to LC are Multimode. Only the SFP+ module is Singlemoderegards
Florian#doctorsound
#wemakeaudiogreatagain2019/09/01 at 7:51 pm #86137Here are some pics of the job.
I’ve worked for PRG and Production office Germany.
Attachments:
You must be logged in to view attached files.2018/04/20 at 4:55 pm #70521what??? I hope this is not the truth!!!
That timing is mutch too late…I’m looking forward to get the important changes to fw next month!
For me the 1.2 FW is a good beginning but not more… do your homework A&H!cheers
2018/03/18 at 1:47 pm #69709and routing option for PAFL to physical output!!!
2018/03/18 at 1:09 pm #69707+1
2018/03/17 at 12:36 pm #69684that’s a feature we are waiting for… 🙁
2018/03/17 at 12:31 pm #69683pafl to output port is absolutly requied for monitor operations.
The seperated wedge/IEM bus (featured in Dlive/GLD) would be a perfect addon for the SQ series.
2018/02/12 at 1:18 pm #68834you can connect the SQ via Dante to RIO stagebox. But you can’t control of the gain. You have to buy a yamaha console 🙂 or use the R-Remote for Mac/PC.
gain sharing with yamaha desks is not possible. This feature is only available @ dlive series and only for dlive consoles.
2018/02/01 at 10:44 am #685981. yesss please! and by the way… we also need this function for Dlive and GLD… please!!!
2. I’m sure the guys are programming at the moment to realize this feature… it was in the QU-Series it has to be also in the SQcheers
2018/01/31 at 3:27 pm #68579for now it’s a wish… just ordered and just waiting for it.. 😉
cheers
************************
SQ6+2x DX168+DANTEGLD80+AR248+AR84+AB168+DANTE
DLIVE S5000+DM64+2xDX168+DANTE+AES/EBU+GigaACE+IP8
QU-PAC + 2x ME-1
2018/01/30 at 5:05 pm #68561that’s possible but not comfortable. It’s a failure in the programming of the console. I can accept this for low class desks but not for the flagship series. If you work on CL5 or ssl live it’s absolutely normal to prelisten the automix channels.
And of course it’s important for the workflow.
it’s not a feature, it’s a bug 🙂cheers
2018/01/29 at 5:46 pm #68549that’s not acceptable for me.
I have to pre listen to my channels in PFL mode during AMM operated TV-Liveshows.
I hope A&H can fix this problem asap.cheers
2017/10/12 at 10:31 am #65642Hi,
is there a problem with the release date für fistral?
I’m waiting for the AMM for a production end of this month.
Is there a time table for final release?Greets
Florian2011/01/17 at 8:41 am #27054Hi Michael,
I had the same problem a few month ago. I’ve changed the CAT5-Cables to connect the Hearbus-Hub with the IDR-Unit. I think the problem is the shield of the CAT5-Cable. (UTP / S-UTP). Please try it out. I use a short patch (1,5m) from the IDR to the Hearbus-Hub.
Cheers
Florian
—
Soundwork Engineering
Germany -
AuthorPosts